Skeletal System Drawing and Parts Skeleton System Drawing and Parts in Art

If you want to learn how to draw a skeleton, I can show y'all how to exercise it step by pace. Together we'll describe the spine, the ribcage, the pelvis, the arms and legs—every bone simplified and explained!

1. How to Draw a Ribcage

Stride 1

Draw a vertical line and divide information technology into five parts—these volition exist the lumbar vertebrae. Retrieve to keep these get-go lines light, so that you tin cover them later with the final lines.

Step two

Describe 12 more than sections, making them smaller as you finish.

Step 3

Outline the discs between the vertebrae.

Step 4

Give a shape to each vertebra.

Step v

The ribcage volition get-go iii vertebrae from the bottom. Hither, draw two squares, with a side 5 vertebrae long.

Step 6

From this place, draw a bend going right over the whole spine. This will be the basic outline of the ribcage.

Pace vii

"Cut" the sides of the ribcage to circular its shape.

Footstep 8

Depict the dorsum part of the ribs at present: xi long and one brusk. Add pseudo-ribs to the remainder of the vertebrae, too.

Footstep 9

We're going to the front end of the ribcage at present. Depict the sternum.

Stride 10

Divide the sternum into quarters, then the bottom quarter into thirds.

Step 11

Add the front end side of the ribs now. Seven of them should be continued directly to the sternum...

... and the other iii to the 7th one. The final ii ribs are "free" and not connected to anything.

Stride 12

You lot can outline the ribs now, giving them some thickness.

Step 13

The ribs are fastened to the sternum with a cartilaginous part. Separate it from the rest with a curve.

Pace fourteen

To add the cervix and head, draw 2 lines on pinnacle using this measurement:

Step 15

Draw the circular cranium.

Footstep sixteen

Describe the skull using our separate tutorial:

Footstep 17

Draw the neck, using the same technique equally with the other vertebrae.

2. How to Depict Pelvis

Footstep 1

Mark the distance between the ribcage and the pelvis. It should be near two vertebrae long.

Step 2

Draw two squares similar to the ones before.

Step three

Cut their sides.

Step four

Attach a "bow" to the concluding vertebra.

Step five

Attach two big circles to the sides of this bow.

Step 6

Describe a large oval beneath.

Step 7

Depict a piffling circle below the oval.

Step 8

Draw a curve inside the tapered sides, connecting at the minor circle.

Step 9

Plough the pocket-sized circle into a narrow oval.

Step 10

Draw half of a middle below.

Step 11

Add two circles on the side of the narrow oval.

Step 12

Add "openings" in the shapes below.

Footstep 13

Add more circles that will help us create a detailed shape of the pelvis.

Step 14

Outline the pelvis using these guide lines.

Step fifteen

Permit's add the sacrum, too. Information technology'due south made of five fused vertebrae, but ane of them has already been used in the "bow", so add only 4 sections.

Step 16

Depict the sides of the sacrum and connect them to the balance of the pelvis (the large circles).

Step 17

Add the tiny "tail" vertebrae.

Step 18

Although the sacrum vertebrae are fused, in that location are still some spaces visible between them. Describe them as simple circles.

3. How to Describe Artillery

Step 1

Describe a trapezoid around the ribcage to fix the width of the shoulders.

Pace 2

Draw the curves of the clavicles, attached to the top of the sternum.

Step three

Add together two ovals at the ends of the clavicles.

Step four

Outline the clavicles to give them thickness.

Step 5

Add a circle under the end of each clavicle. This will be the socket of the shoulder blade.

Step vi

Draw a tilted oval on its side.

Step 7

The clavicle is fastened to the shoulder blade in a special way. Draw its dorsum part and a protrusion in the forepart.

Step eight

Draw the shoulder blades now.

Footstep 9

Describe the ball of the humerus fastened to the socket.

Step 10

Sketch the position of the arms. The upper arm should be longer than the forearm. The elbow in the neutral position lands exactly in the waist area.

Step 11

Describe the oval wrist. The right hand will be directed palm towards us, and the left i will exist rotated, showing the side.

Step 12

Add the 3 fingers showtime, as they have similar lengths, with the middle ane beingness the longest.

Step xiii

Add the other fingers now.

Step xiv

Draw the arm basic using a few simple guide lines:

Step 15

There'south cartilage between the arm and forearm, with a special shape that allows for rotation of the forearm basic:

Step 16

Draw the radius and ulna. Pay attending to their rotation in the left hand.

Step 17

Cross the fingers with a "web", marking the placement of the joints.

Step 18

Add the oval joints.

Footstep xix

Outline the finger bones.

Step 20

Add some small bones in the wrists.

four. How to Draw Legs

Step 1

Draw the heads of the femur fastened to the sockets in the pelvis.

Footstep 2

Draw the length of the femur. These bones should be slightly tilted towards the heart line. Make them most every bit long as the ribcage plus the waist.

Step 3

Add some space before you describe the tibia.

Step 4

Describe the tibia.

Step 5

Add some ovals to create the shape of the femur.

Stride 6

Outline the femur.

Pace seven

Add together the patella.

Step 8

Add the guide shapes of the tibia.

Stride 9

Outline the tibia.

Step 10

There'south i more bone here, the fibula. Depict it in a like way:

Step eleven

Add some particular to the knee.

Pace 12

Describe the bones of the talocrural joint.

Pace 13

Draw the toes with their total length.

Step xiv

Mark the joints.

Step 15

Add ovals to the joints.

Step 16

Outline the toe bones.

Step 17

Add the heel at the back.

5. How to Finish a Drawing of a Skeleton

Step 1

Now information technology's fourth dimension to finish the drawing! Have a darker tool, or erase most of the guide lines, and add together all the crucial outlines.